Before including the dimmer to your network, confirm that it works manually 100% of the time when controlled from the physical switch.
Once you've determined that the dimmer works fine as a manual light switch, it's time to add it to your Home Assistant network. Here's how to do it:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- Toggle the dimmer UP 3 times very quickly
- Home Assistant will confirm that the switch was added, and it will be immediately visible in your device list.
Once the dimmer has been added to your hub, you'll be able to create rules for it, control it remotely, and customize it via the advanced settings.
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN24 we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
If you are having issues adding the dimmer to your network, the first thing to try is exclusion which is a type of Z-Wave reset.
Please don’t hesitate to contact us if you need help pairing your switch to Home Assistant, or if you have any other questions!
