There is No LED Activity and My ZSE44 Temperature | Humidity Sensor is Unresponsive
Once the battery tab is removed, the ZSE44 Temperature | Humidity Sensor's LED indicator should flash for around 10 seconds or any time you press the Z-Wave button. Does the LED indicator fail to flash, or is the device unresponsive? First, make sure the battery is inserted correctly per the positive / negative po…
There is No LED Activity and My ZSE43 Tilt | Shock Sensor is Unresponsive
The ZSE43 Tilt | Shock Sensor's LED indicator should flash once the battery tab is removed from the device for around 10 seconds, or any time you press the Z-Wave button. Are you not seeing the LED indicator flash, or is the device unresponsive to commands? To start, please ensure the battery is inserted correctly…
There is No LED Activity and My ZSE42 Water Leak Sensor is Unresponsive
If the battery tab has been removed from the device, the LED indicator for the ZSE42 Water Leak Sensor should flash for around 10 seconds, or whenever the Z-Wave button is clicked. Is the sensor unresponsive and the LED is not flashing? To begin, double check that the battery is inserted in the sensor correctly, a…
There is No LED Activity and My ZSE41 Open | Close Sensor is Unresponsive
The LED indicator for the ZSE41 Open | Close Sensor should flash for around 10 seconds once the battery tab has been removed from the device. Does the LED not flash? Is the ZSE41 unresponsive to commands? Try the steps below to resolve the issue. First, double check that the battery is inserted in the sensor corre…
How Do I Perform Hard Reset on My ZSE18 Motion Sensor?
This type of reset is a nifty trick if you find your device is unresponsive in any way. LED indicator not behaving the way it should? Sensor not updating even after waking it up manually? Or do you just want to clear the device of all custom settings and recorded activity? Hard (aka "Factory") reset is the way to go…
There is No LED Activity and My ZSE18 Motion Sensor is Unresponsive
If the battery has been activated, the sensor should light up in response. If you insert the battery and see no LED activity whatsoever, first check that the battery is free of its plastic wrapping. It may not be obvious at first glance, but there's a thin plastic covering surrounding the battery if you have a senso…
My ZEN34 Remote Switch Isn't Powering Up
Make sure the battery tabs have been removed in order to power your Remote Switch. You'll want to use the included triangle tool to gently open the remote and access the batteries. If you remove the battery tabs and see no LED activity whatsoever, make sure the batteries are oriented properly. If you find the rem…
How to Create Direct Association for Your ZEN34 Remote Switch in Vera
While the ZEN34 is not supported by Vera as of 11/2020, you should be able to include it to your system, and program it via direct association! The direct association method works between 2 Z-Wave devices included with the same security level only. You will be able to program the ZEN34 to control other Z-Wave device…
How to Access the Advanced Settings for My ZSE44 Temperature | Humidity XS Sensor in Vera
Need to adjust the settings of your ZSE44? You can modify the settings for your Temperature| Humidity Sensor to suit your needs. Follow the steps listed below to change parameters (also called settings) in your Vera interface. Make sure to change the correct values for Variable (corresponding the Parameter yo…
How to Access the Advanced Settings for My ZSE43 Tilt | Shock XS Sensor in Vera
Change the settings of your ZSE43 to fit your installation needs! You can adjust the settings for your Tilt| Shock Sensor to suit your needs. Below are the steps to change parameters (or settings) in your Vera interface. Make sure to change the correct values for Variable (corresponding the Parameter you'd li…
