Prior to mounting your ZSE43 sensor in its final location, you'll need to include your ZSE44 sensor to your Z-Wave network. 

To auto-include your ZSE44 Temperature|Humidity XS Sensor:

1. Put your Z-Wave hub into inclusion/pairing mode (see your hub's manual for instructions since each brand is different). If you’re using an S2 hub, it may ask you to enter the DSK key printed on the back cover sticker to complete secure inclusion
2. Insert the four batteries (if you already did, take them out for at least 15 seconds before starting the inclusion process)
3. The LED indicator will start blinking and the sensor will join the network automatically

To manually include your ZSE44 Temperature|Humidity XS Sensor:

1. Put the Z-Wave hub into inclusion/pairing mode (see your hub's manual for instructions since each brand is different)
2. Click the Z-Wave button 3 times quickly.
3. The new device should appear on your hub's device list

If you've tried auto and manual inclusion but find the ZSE44 sensor is not including, please exclude the device, and then include it again.

Please let us know if you have any questions about this process!