Include your ZSE42 and have it recognized right out of the box!
If the settings are not showing up for you right away, you'll want to confirm your Hubitat hub is on the latest platform version (2.2.9 or higher). Just look under Preferences in the device view to customize your sensor.
If you'd like to adjust a setting that isn't exposed in the built-in driver, you can try using the custom driver to customize your XS Water Leak Sensor.
Here are the steps for using the custom driver:
-
Open Hubitat in your browser.
-
Click on Drivers Code in the side menu.
-
In the top right corner, click on "+New Driver" and paste the code from the following link to access the code for the driver, then copy ALL of the code from the page.
-
Click Save in the top right corner.
-
You'll see a Zooz ZSE42 WATER LEAK XS SENSOR in your Drivers Code list now.
-
Assign the driver to the device by opening to the device view and selecting the Zooz ZSE42 WATER LEAK XS SENSOR from the drop-down menu under Device Type.
-
Click Update Device.
-
You will now see the additional setting display in the device view in Hubitat where you can customize the sensor.
-
Once done, click Update Device again.
Here is the full list of settings for the XS Water Leak Sensor.
Reach out to us with any questions about your Zooz ZSE42 sensor!
