Pairing your ZSE41 XS Sensor is easy!
Here are the steps for adding the ZSE41 to Vera:
- Power the ZSE41 Sensor up.
- Select the Devices tab in your Vera app. Then click on the gray "+ Add Device" button.
- Choose Generic Z-Wave Device from the device list
- Press and release the Z-Wave button 3 times as quickly as possible (the LED indicator will start flashing)
- Vera will create 2 new devices: the master ZSE41 device (with Off On capabilities you can ignore) where you can track the battery status and change setting and a child door/window device where you can track the open/close status of the sensor.
XS Sensor won't include? Try excluding the unit from your Vera network before trying the inclusion instructions again. The process acts as a soft reset to help with any configuration or inclusion issues. Once inclusion times out, try the steps below:
- Tap the green Retry button in the bottom right corner of the app - this will put Vera into exclusion mode.
- Exclude the ZSE41 by pressing the Z-Wave button 3 times as quickly as possible
- The LED indicator should start flashing. Vera will confirm the device was excluded in a message on top of the screen.
- Retry the inclusion process once again - Vera will automatically go back to the inclusion screen once exclusion is finalized.
*Updated Disclaimer: We've seen several issues with Vera hubs properly recognizing and integrating 700 & 800 series Z-Wave devices. It seems that the mios and Vera systems are no longer updated or supported for new features and Z-Wave libraries as they're replaced with the new Ezlo platform instead.
Unfortunately, we've had to remove Vera hubs from our compatibility lists for this reason. We're not able to modify devices to accommodate older discontinued systems like these as we need to follow the current DSK for our devices to pass Z-Wave certifications and work well with active platforms that are up to date. We apologize for any inconvenience.
Let us know if you're still having trouble pairing the device, or have any other questions!
