The sensor will work great with SmartThings out of the box.
Here is how to add it to your hub in no time:
- Power the sensor up
- Tap the plus icon in the home screen of the SmartThings app
- Tap Device
- Tap "Scan nearby" (in the top right corner of the screen on Android and on the bottom of the screen on an iPhone)
- While the app says "Scanning...", click the Z-Wave button 3 times as quickly as possible (the LED indicator will start flashing)
- Follow the prompts on the screen to set your sensor up. It may give you a security error and ask for secure set-up in which case you can just tap on the Secure Set-up button and scan the QR code on the back of the sensor for secure inclusion.
If your ZSE41 sensor is having trouble being added, give exclusion a try to help with any configuration or inclusion issues. It can be done even if the unit hasn't been added before:
- Tap on your hub in the home page of the app
- Tap the three dots in the top right
- Tap Z-Wave Utilities
- Tap Z-Wave Exclusion
- While the app is searching for a device, click the Z-Wave button 3 times as quickly as possible
- The app will indicate when the device is successfully removed. Tap Done.
Let us know if you have any questions!