Ready to add the ZEN32 to your Hubitat network? Let's do it!
The ZEN32 Scene Controller is fully integrated with Hubitat so you'll have access to all of the advanced settings right out of the box. You can see the complete list of advanced settings here.
Smart Start Inclusion
On the Hubitat app:
- Open the Tools tab (wrench icon on the bottom)
- Scroll to the bottom, select Z-Wave
- This will take you to a screen where you can select either Smart Start or regular inclusion
- Select Smart Start
- This will take you to the smart start inclusion list. Devices will be displayed there that are in the process of inclusion through Smart Start.
- Select the QR symbol in the top right to open the camera for the DSK scan
- Power the device (important to do this AFTER QR scan)
- The device integration will begin. The window will appear asking you to name the device; click Save after naming
- Finishing inclusion may take a few minutes
If you have any issues with Smart Start Inclusion on Hubitat, please review this video: https://www.youtube.com/watch?v=Sf-Fldjb0to. The steps should be the same whether you have a C-7 or C-8.
Manual Inclusion:
-
Open Hubitat in your Internet browser
-
Go to Devices
-
Click on Discover Devices in the top right corner
-
Click on Z-Wave
-
Click on Start Z-Wave Inclusion
-
While the app says is in inclusion mode, click the main switch button on the device 3 times very quickly
-
Rename and confirm the found device.
If you're having trouble pairing the ZEN32 you can give exclusion a try first - the process can help with any configuration issues. Additionally, you can try including the unit without security to see if that works better for you.
Questions about your new ZEN32 Scene Controller? Just ask us!