With the ZEN76 S2 Switch, you'll have access to many advanced features, like auto turn-on timer and smart bulb mode.

Use the steps below to adjust any parameter setting for your ZEN76 in your Vera interface; we used on/off status recovery as an example, but the same method applies to any other parameter. The full list of settings can be found here. Unfortunately, Vera doesn't currently support the scene control (multi-tap) functionality of our switches.

How to change an advanced setting for your ZEN76 S2 Switch in Vera:

1. Open your Vera online interface (the browser dashboard, not the app)
2. Click on the Zooz ZEN76 S2 Switch
3. Go to Device Options
4. Click on Add configuration settings
5. Put in the following to change on/off status after power failure:
   • Variable = 8
   • Data Size = 1 byte dec
   • Desired Value =  [0 – forced to OFF (regardless of state prior to power outage); 1 – forced to ON (regardless of state prior to power outage); 2 – remembers and restores on/off status after power failure (default)]
6. Click on Save Changes

Send us a message if you have any questions about your ZEN76 S2 Switch!