The ZEN22 Dimmer Switch can be included easily to your Hubitat hub since it is officially integrated.
It supports S2 security so if you are using a C-7 hub, please make sure to pair your ZEN22 switch as S2 Unauthenticated if it doesn't automatically default to that during inclusion. If you're using an older Hubitat hub, S2 security is only supported on the C-7 hub so you can simply follow the steps below to add your switch.
The inclusion process is easy and shouldn’t take very long. Use these instructions to pair your ZEN22 with Hubitat:
-
Open Hubitat in your Internet browser
-
Go to Devices
-
Click on Discover Devices in the top right corner
-
Click on Z-Wave
-
Click on Start Z-Wave Inclusion
-
While the app says is in inclusion mode, tap the upper paddle of the dimmer 3 times as quickly as possible (LED indicator will start flashing)
-
Rename and confirm the found device
If your ZEN22 switch is not connecting, it may need to be excluded from the hub first, even if it was never a part of your network. The exclusion process acts as a soft reset to fix any configuration difficulties the switch may be having. The switch’s advanced settings should also be seen in the device view on Hubitat. If you aren’t seeing them, check if your Hubitat platform is up-to-date, and then use these instructions to add a custom device driver to your switch.
Please let us know if you need help connecting your ZEN22 to your hub.
