The ZEN30 Double Switch will work out of the box with Hubitat has it is officially integrated.
The device's advanced settings can be accessed directly from the device view on Hubitat. If they aren't appearing or you're having trouble adding the device, confirm you have the latest version of Hubitat installed, then give the custom driver for the ZEN30 a try. Otherwise, you can just follow the step-by-step instructions below to add your ZEN30 Double Switch to your hub:
Smart Start Inclusion
On the Hubitat app:
- Open the Tools tab (wrench icon on the bottom)
- Scroll to the bottom, select Z-Wave
- This will take you to a screen where you can select either Smart Start or regular inclusion
- Select Smart Start
- This will take you to the smart start inclusion list. Devices will be displayed there that are in the process of inclusion through Smart Start.
- Select the QR symbol in the top right to open the camera for the DSK scan
- Power the device (important to do this AFTER QR scan)
- The device integration will begin. The window will appear asking you to name the device; click Save after naming
- Finishing inclusion may take a few minutes
If you have any issues with Smart Start Inclusion on Hubitat, please review this video: https://www.youtube.com/watch?v=Sf-Fldjb0to. The steps should be the same whether you have a C-7 or C-8.
Manual Inclusion
-
Open Hubitat in your Internet browser
-
Go to Devices
-
Click on + Add Device in the top right corner
-
Click on Z-Wave
-
Click on Start Z-Wave Inclusion
-
While the app says is in inclusion mode, tap the upper paddle of the dimmer 3 times as quickly as possible (LED indicator will start flashing)
-
Rename and confirm the found device
If your ZEN30 won’t pair with Hubitat, try excluding the switch first. The process can help with a variety of configuration issues before you try to connect it again.
If you’re still experiencing difficulties with your device, please don’t hesitate to reach out to us for assistance!
