ZEN12 Motion Dimmer Change Log
Here is a list of updates we have made to the ZEN12 Motion Dimmer so far:
VER. 1.0 (released 07/2026)
Original release
Hardware: 1
- 800 Series Z-Wave chip
- Built-in PIR motion sensor
- Built-in ambient light (lux) sensor
- Multi-color LED banner
Firmware: 1.00
- Central Scene support
- Smart Bulb Mode (relay disable option)
- SmartStart inclusion
- S2 Authenticated Security
- Z-Wave Long Range support (direct communication without mesh routing)
- Motion detection reports
- Lux (ambient light) reports
Firmware: 1.0.1 (released 08/2026 as OTA)
- Fixed a bug where the ZEN12 could turn the light off prematurely if additional motion was detected during the Motion Clear Delay (Parameter 17). The device now resets the internal motion timer whenever new motion is detected, keeping the light on until the full Motion Clear Delay has elapsed after the last detected movement.
