S2 Switches like your ZEN26 come with a bunch of nifty advanced options, like an auto timer and on/off status after power failure.
You'll also be able to customize paddle control and the LED indicator (by the way, you can enable and disable the LED indicator manually if you'd like - here's how ). Below is the process to change parameters in your Vera interface; we took on/off status recovery as an example. The rest of the parameter details can be found in your device manual. Unfortunately, Vera doesn't currently support the scene control (multi-tap) functionality of our switches.
1. Open your Vera online interface (the browser dashboard, not the app)
2. Click on the Zooz On/Off Switch ZEN26
3. Go to Device Options
4. Click on Add configuration settings
5. Put in the following:
To change on/off status after power failure:
- Variable = 5
- Data Size = 1 byte dec
- Desired Value = [0 – forced to OFF (regardless of state prior to power outage); 1 – forced to ON (regardless of state prior to power outage); 2 – remembers and restores on/off status after power failure (default)]
6. Click on Save Changes
Have questions about your switch's advanced options? Let our team know!
