Inclusion, also known as pairing or adding a device, is the process of connecting a device to your Z-Wave hub.
Simply plug in your ZAC38 and ensure it is working manually, then follow the simple steps below to include the ZAC38 Range Extender to your Z-Wave hub.
Here are the steps to add the device to your system:
- Plug the ZAC38 Range Extender into the grounded 120VAC receptacle you plan to use it with
- Put your Z-Wave hub into inclusion mode (see your controller's device manual, as each brand is different)
- Press and release the Z-Wave button 3 TIMES QUICKLY
- The LED indicator will start flashing green to confirm inclusion mode and turn green for 2 seconds once inclusion is completed.
Once the Range Extender is added, you'll be able to create rules for it, control it remotely, and customize it via the advanced settings.
Trouble including the ZAC38 Range Extender to your Z-Wave network? Start by trying exclusion. This process can be done even if the range extender has never been included; exclusion is simply a hub-based Z-Wave reset, often resolving any connectivity or configuration issues.
Send us message if you have any questions or are having any issues with your ZAC38 Range Extender!