Once the device is installed correctly and powered with a proper 6-32 VDC power supply, adding the device to your Z-Wave hub is quick and easy! Simply follow the steps below to have the ZEN53 included in no time!
To auto-include your ZEN53 DC Motor Controller:
- Put your Z-Wave hub into inclusion/pairing mode (see your hub's manual for instructions since each brand is different). If you’re using an S2 hub, it may ask you to enter the DSK key printed on the back cover sticker to complete secure inclusion
- The LED indicator will blink green to signal communication and turn green for 2 seconds if inclusion is successful.
To manually include your ZEN53 DC Motor Controller:
- Put the Z-Wave hub into inclusion/pairing mode (see your hub's manual for instructions since each brand is different)
- Click the Z-Wave button 3 times quickly.
- The LED indicator will blink green to signal communication and turn green for 2 seconds if inclusion is successful.
- The new device should appear on your hub's device list
If you've tried auto and manual inclusion but find the ZEN53 DC Motor Controller is not including, please try to exclude the device, then try including again.
Please let us know if you have any questions about the process. We're happy to help!