You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
announcement close button
Home > Light Switches > ZEN76 S2 On/Off Switch > ZEN76 & Your Z-Wave Hub > How to Add Your ZEN76 S2 Switch to Your Z-Wave System
How to Add Your ZEN76 S2 Switch to Your Z-Wave System
print icon

After testing your switch to verify it's working manually, let's include it to your Z-Wave system.

We call it "inclusion" but there are many words for it depending on the system you're using. Inclusion is just the process of adding or pairing a device to your Z-Wave system.


Here's how to include your ZEN76 Switch to your Z-Wave system:

1. Put your Z-Wave hub into inclusion mode (see your hub's manual for specific inclusion steps)
2. Tap the UPPER paddle 3 times quickly to finalize the inclusion process
3. A new on/off device will appear on your controller's device list


* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.


If you try including the switch and don't see it appear on your device list, here's what to try


If you have any questions about the process, don't hesitate to reach out!

0 out of 0 found this helpful

Have you tried our virtual assistant chatbot? This AI tool can help you find answers from thousands of articles in our Knowledge Base quickly. Find it in the bottom righthand corner of the page.

Need more help? Our friendly team is ready to help you with any questions or concerns you may have about Zooz devices. Click here to submit a support ticket.

Are your devices registered? Extended warranty and firmware access is available for registered Zooz customers. Click here to submit your registration form.

Find the latest Zooz devices and great Z-Wave deals at The Smartest House.
scroll to top icon