You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
announcement close button
How to Add Your ZEN76 S2 Switch 700 to Your Z-Wave System
print icon

After testing your switch to verify it's working manually, let's include it to your Z-Wave system.

We call it "inclusion" but there are many words for it depending on the system you're using. Inclusion is just the process of adding or pairing a device to your Z-Wave system.

 

Here's how to include your ZEN76 Switch to your Z-Wave system:

1. Put your Z-Wave hub into inclusion mode (see your hub's manual for specific inclusion steps)
2. Tap the UPPER paddle 3 times quickly to finalize the inclusion process
3. A new on/off device will appear on your controller's device list

 

If you try including the switch and don't see it appear on your device list, here's what to try

 

If you have any questions about the process, don't hesitate to reach out!

Feedback
0 out of 0 found this helpful

scroll to top icon