With so many advanced settings, how will you customize your ZEN72?
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN72 Dimmer we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
All of the ZEN72's settings should be available once the dimmer is paired to your network. If a certain setting isn't showing up for you, you can use a different method to change your Dimmer's settings.
You can now change any parameter manually on the JS Z-Wave integration for Home Assistant.
It needs to be done in zwavejs2mqtt and it’s not possible to do this within HA directly at the moment:
- Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
- You can enter the data according to the product documentation and click SET for the parameter to be updated.
- If you have a battery-powered device, you'll need to wake it up by performing the same activation sequence as during inclusion.
The ZEN72 supports OTA updates, so if you're on an older firmware version and would like access to the latest advanced setting options we recommend updating your switch.
Send us a message if you have any questions or need help with your ZEN72! We'll be happy to help.
