You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
announcement close button
ZEN23 On/Off Toggle Switch Specs
print icon

Here are the technical details for the On/Off Toggle Switch ZEN23 VER. 2.0/3.0:

  • Z-Wave Signal Frequency: 908.42 MHz
  • Power: 120 V, 60 Hz
  • Maximum Load: 960W Incandescent, 150W LED and CFL bulbs, 1800W (15A) Resistive
  • Range: Up to 100 feet line of sight
  • Installation and Use: Indoor Only
  • Operating Temperature: 32-104° F (0-40° C)
  • Dimensions: 4 1/8" tall x 2 1/8" wide (with heat sink tabs,1 3/4" without the tabs) x 1 3/8" deep
  • Weight: 10 oz

Here are the technical details for the On/Off Toggle Switch ZEN23 VER. 4.0:

  • Z-Wave Signal Frequency: 908.42 MHz
  • Power: 120 VAC, 60 Hz
  • Maximum Loads: 960W Incandescent, 150W LED's and CFL's, 1800W (15A) Resistive, 3A for ceiling or exhaust fans
  • Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
  • Operating Temperature: 32-104° F (0-40° C)
  • Installation and Use: Indoor only

Questions? Just ask!

Feedback
2 out of 7 found this helpful

Have you tried our virtual assistant chatbot? This AI tool can help you find answers from thousands of articles in our Knowledge Base quickly. Find it in the bottom righthand corner of the page.

Need more help? Our friendly team is ready to help you with any questions or concerns you may have about Zooz devices. Click here to submit a support ticket.

Are your devices registered? Extended warranty and firmware access is available for registered Zooz customers. Click here to submit your registration form.

Find the latest Zooz devices and great Z-Wave deals at The Smartest House.
 
scroll to top icon