Here is a list of updates we have made to the ZSE18 Motion Sensor so far:

VER. 1.0 (released 6/2018)

Original release

Hardware:

• 500 Series Z-Wave chip
• Mounting bracket included
• 1 CR123A battery included
• Ability to power the sensor with a micro USB cable and power adapter (NOT included)

Firmware: 1.0

• S2 Security (Unauthenticated)

• Advanced settings to adjust motion and vibration reporting

VER. 1.03 (released 8/2021)

Hardware:

• Optimized motion reporting

Firmware: 1.03

• Optimized motion reporting (preventing a motion trigger loop present on selected units from 2021 manufacturing batch)

VER. 800LR (released 02/2024)

Hardware: 2.0

• 800 Series Z-Wave chip

Firmware: 2.0

• Based on 1.03 firmware (see above)
• Long Range ready
• Removed Advanced Parameter 19: Binary Sensor Report. The 800 series Z-Wave chip has abandoned the Sensor Binary Reports and uses Notification Command Class only, according to Z-Wave specification.

There aren't any firmware updates available for this model, the only change that was implemented also requires a hardware update. You can access all other firmware files here after you register your product and create an account here.  If you have any questions, please reach out to our support team. We're here to help you 7 days a week!