My ZSE70 Outdoor Motion Sensor Shows Offline in SmartThings
This error is generally indicative of a range or connectivity issue. Let's figure this out: You can start by performing Network Repair . This feature refreshes the connections between the hub and devices, and allows the hub to find the best communicate route to each device. In your SmartThings app: * Open your…
My ZEN34 Remote Switch is Unresponsive to Home Assistant
You were able to add your Remote Switch to the network, but it's going offline or is otherwise unresponsive to Z-Wave commands. Your Remote Switch is a 700-Series Z-Wave device that has range of up to 250 feet (line of sight). With that said, interferences like large furniture, thick walls, and metal elements can sh…
How to Access Advanced Settings for My ZSE70 Outdoor Motion Sensor on the Z-Box
No drivers, no custom handlers; accessing the full advanced settings has never been easier than on the Z-Box. The ZSE70 Outdoor Motion Sensor will be recognized and configured correctly by the Z-Box. Customizing the advanced settings is simple; just follow the steps below to start programming your ZSE70 on the Z-Box …
How to Access Advanced Settings for ZSE70 Outdoor Motion Sensor on Hubitat
You’ll want to ensure you install the custom driver for the ZSE70 Outdoor Motion Sensor in order for the device to be properly recognized and to provide access to the advanced settings. All About Advanced Settings The terminology for advanced settings varies depending on your Z-Wave hub. For instance, Hubitat lists…
How to Access Advanced Settings for My ZSE42 Water Leak XS Sensor on Hubitat
Include your ZSE42 and have it recognized right out of the box! If the settings are not showing up for you right away, you'll want to confirm your Hubitat hub is on the latest platform version (2.2.9 or higher). Just look under Preferences in the device view to customize your sensor. All About Advanced Settings Th…
How to Access Advanced Settings for My ZSE41 Open | Close XS Sensor on Hubitat
Hubitat will recognize your ZSE41 Sensor out of the box! If the settings are not showing up for you right away, you'll want to confirm your Hubitat hub is on the latest platform version. The ZSE41 is in a beta release so there may also be a firmware update available for the device in the near future. Once updated, a…
How to Add Your ZEN37 Wall Remote to SmartThings
Before you include the device, you will need to install the Edge driver to have the ZEN37 Wall Remote properly recognized on SmartThings. Once the driver is installed, follow the simple steps below to include the device. The battery for the ZEN37 typically arrives 80% charged out of the box. Once you receive a low…
How to Add Your ZSE11 Q Sensor to Vera
Add the ZSE11 Q Sensor to you Vera hub in no time! No additional configuration is needed, but you may need to wake it up the sensor a few times by clicking the Z-Wave button 3 times quickly after it's added so it's fully configured. Here's how to include the device: 1 . Power the sensor by USB or battery and br…
My ZSE11 Q Sensor is Not Reporting Reliably To My Hub
Are you experiencing issues with your ZSE11 Q Sensor despite successfully installing and linking it to your hub? Do you find that it's consistently displaying incorrect status readings, such as being stuck on motion or no motion, or perhaps failing to generate reports altogether? Check out the troubleshooting steps b…
How to Access Advanced Settings for ZSE11 Q Sensor on Hubitat
For the new 800 series ZSE11, you will need to install the custom driver to ensure proper motion reporting. The 800 series Z-Wave chip has abandoned the Sensor Binary Reports and uses Notification Command Class only, in accordance with proper Z-Wave specification. All About Advanced Settings The terminology for adv…
