You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
Home > Light Switches > ZEN74 Toggle Dimmer > ZEN74 & Vera > How to Access Advanced Settings for the ZEN74 Toggle Dimmer on Vera
How to Access Advanced Settings for the ZEN74 Toggle Dimmer on Vera
print icon

You can fully customized the ZEN74 Toggle Dimmer by adjusting the ramp rate, double tap and single tap behavior, or manual dimming speed.

Use these instructions to change the advanced settings for the ZEN74 in your Vera interface; we used the ramp rate as an example, but the same steps apply to any other parameter. Take a look at all of the advanced options for this model here

 

How to change an advanced setting for your ZEN74 Toggle Dimmer in Vera:

  1. Open your Vera online interface (the browser dashboard, not the app)
  2. Click on the Zooz ZEN74 Toggle Dimmer
  3. Go to Device Options
  4. Click on Add configuration settings
  5. Put in the following to change the ramp rate (fade-in/fade-out effect):
    • Variable = 9
    • Data Size = 1 byte dec
    • Desired Value =  [1 – 99 (seconds) or 0 (instant on/off)]
  6. Click on Save Changes

 

Send us a message if you run into any issues!

Feedback
1 out of 1 found this helpful

Have you tried our virtual assistant chatbot? This AI tool can help you find answers from thousands of articles in our Knowledge Base quickly. Find it in the bottom righthand corner of the page.

Need more help? Our friendly team is ready to help you with any questions or concerns you may have about Zooz devices. Click here to submit a support ticket.

Are your devices registered? Extended warranty and firmware access is available for registered Zooz customers. Click here to submit your registration form.

Find the latest Zooz devices and great Z-Wave deals at The Smartest House.
 
scroll to top icon