Even though the ZEN34 is not supported by Vera as of 11/2020, you should be able to include it to your system, and program it via scenes and direct association.
After you follow the instructions in the manual to activate the Remote Switch by pulling the battery tabs (yes, there are 2!), please follow the below steps to add the device to your Vera controller.
- Select the Devices tab in your Vera app. Then click on the gray "+ Add Device" button
- Choose Generic Z-Wave Device from the device list
- Tap the UPPER paddle on the Remote Switch 6 times quickly. The LED indicator will blink blue and turn solid green for a couple of seconds once the process is successful.
- A new Z-Wave switch will appear on your device list
If you're having issues pairing the Remote Switch with Vera, try excluding it from the network first.
You can find instructions for programming direct associations with the ZEN34 Remote Switch here.
While the ZEN34 is not fully supported by Vera, it is integrated with the following Ezlo hubs:
*Updated Disclaimer: We've seen several issues with Vera hubs properly recognizing and integrating 700 & 800 series Z-Wave devices. It seems that the mios and Vera systems are no longer updated or supported for new features and Z-Wave libraries as they're replaced with the new Ezlo platform instead.
Unfortunately, we've had to remove Vera hubs from our compatibility lists for this reason. We're not able to modify devices to accommodate older discontinued systems like these as we need to follow the current DSK for our devices to pass Z-Wave certifications and work well with active platforms that are up to date. We apologize for any inconvenience.
Do you have more questions about the inclusion process? Just let us know! We're here to help.
