The ZEN58 Low Voltage XS Relay is compatible with the following Z-Wave systems:
- Z-Box Hub (recommended for all Zooz products)
- Home Assistant (Z-Wave JS)
- HomeSeer (Z-Wave Plus or Z-Wave JS Front End)
- Hubitat (with custom driver)
- SmartThings Hub (custom driver needed to access advanced settings, download here)
Will this device work with my alarm panel?
Not fully, but will support basic on/off functionality. The ZEN58 will likely be recognized as a single switch with no access to advanced settings.
Most alarm panels, like Alarm.com, generally support single switches, door locks, select thermostats, and other approved devices on their compatibility list. We recommend reaching out to your alarm panel provider to confirm compatibility and check for any upcoming device integrations.
Since the device follows the Z-Wave protocol and is Z-Wave certified, integration is dependent on your alarm panel provider. Unfortunately, while we can request integration, we don’t have control over whether the device is fully recognized—this would need to be supported by your alarm panel provider.
For more details on alarm panel compatibility, click here.
Can I connect the device directly to my Amazon Alexa, Google Home, or other smart speaker?
No. Smart speakers like Alexa or Google are not equipped with a Z-Wave chip and are not Z-Wave gateway controllers. Without a compatible Z-Wave hub, no Z-Wave products will not function correctly with Alexa or Google alone.
However, if your Z-Wave hub supports a Smart speaker integration (like Z-Box, SmartThings, and Hubitat do), this would allow voice control of your Z-Wave devices from your smart speakers.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us or your hub support before you purchase this product.
