Looking to program the timer, set smart bulb mode, or change the input type? Look no further!

The ZEN58 Low Voltage XS Relay has been officially integrated with Hubitat as of Hubitat version 2.4.2.134. Once you include your device, you will have access to the available settings.

(*NOTE - the built-in Hubitat driver does not support the creation of a child device to monitor the input when using parameter 5 at this time. Hubitat will address this in the next platform update.)

NOTE ON CUSTOM DRIVERS: We work with all of the platforms to provide thoughtful integration for our devices. While the most open platforms like Home Assistant or Z-Box allow for full functionality out-of-the-box, other platforms like Hubitat often require dedicated custom code for expanded functionality of Z-Wave devices, even though it's a standardized protocol. If a feature is not exposed in the native integration on the platform, please let Hubitat support and our team know so we can work together to add it based on your feedback. We aim to support as many platforms as possible while balancing development costs and keeping device pricing reasonable. Customer feedback helps guide where we invest in additional platform-specific work.

If any settings are missing, you can try out this Z-Wave Universal Device Scanner to access any parameters that may not be available yet. Please note that use of this driver is intended for expert users; use at your own risk: https://community.hubitat.com/t/release-z-wave-universal-device-scanner/97912

Let us know if you have any questions!