The ZSE44 Temperature | Humidity XS Sensor is fully supported by the Z-Box Hub and will work out of the box, no drivers or custom handlers necessary! After you power the sensor, including it to your Z-Box Hub is fast and easy. You can add the device from the Z-Box web interface or using the Z-Box mobile app. Follow the simple instructions for either method described below.

HOW TO ADD THE ZSE44 USING THE Z-BOX WEB UI:

1. From the sidebar navigation menu of the Z-Box web interface, go to Settings by clicking on the gear icon.
2.  You will be redirected to the Devices menu.
3.  Click on + Add device.
4.  Select the Z-Wave Device option.
5. Be prepared to start inclusion on the ZSE44: open the battery cover using the provided triangle tool and power the sensor by removing the battery tab. Click Start.
6. While the hub is in inclusion mode, click the Z-Wave button on the ZSE44 3 times as quickly as possible (the LED indicator will start flashing).
7. Enter the 5-digit DSK code (printed below the QR code on the inside of the battery cover) when prompted.
8. Once the device is detected successfully, you will see the list of all child devices that have been detected. Click Next.
9. Rename your device and assign it to a room. Click Next.
10. Click Finish once done editing all devices.

HOW TO ADD THE ZSE44 FROM THE Z-BOX MOBILE APP:

1.  Open the Z-Box Hub app on your mobile device.
2.  Click More in the bottom navigation menu.
3.  Click on + Add Devices.
4.  Click on Z-Wave Protocol and follow the same inclusion steps as described for the WEB UI above.

If you're having any issues including your device, please try a soft, hub-based reset, also known as Exclusion.

Questions? Please let us know, and we'll be happy to help!