The ZEN37 Wall Switch is officially integrated with Hubitat so it will work with Hubitat out of the box, but may have some limitations.
The device's advanced settings can only be accessed once you download the custom device driver. Without the driver, you'll still be able to use the device as a button controller with basic Hubitat support to use the single tap (pressed), double tap, held, and released triggers that can be programmed in the Rule Machine app.
Here is how to join and configure your ZEN37 Wall Remote with your hub:
Smart Start Inclusion
On the Hubitat app:
- Open the Tools tab (wrench icon on the bottom)
- Scroll to the bottom, select Z-Wave
- This will take you to a screen where you can select either Smart Start or regular inclusion
- Select Smart Start
- This will take you to the smart start inclusion list. Devices will be displayed there that are in the process of inclusion through Smart Start.
- Select the QR symbol in the top right to open the camera for the DSK scan
- Power the device (important to do this AFTER QR scan)
- The device integration will begin. The window will appear asking you to name the device; click Save after naming
- Finishing inclusion may take a few minutes
If you have any issues with Smart Start Inclusion on Hubitat, please review this video: https://www.youtube.com/watch?v=Sf-Fldjb0to. The steps should be the same whether you have a C-7 or C-8.
Manual Inclusion
-
Open Hubitat in your Internet browser
-
Go to Devices
-
Click on Discover Devices in the top right corner
-
Click on Z-Wave
-
Click on Start Z-Wave Inclusion
-
While the app says it is in inclusion mode, click the top button 6 times quickly. The LED indicator will blink blue during the process and light up green once added successfully. It will light up red if failed.
-
Rename and confirm the found device.
If your Remote Switch won’t pair with Hubitat, try excluding the device first. The process can help with a variety of configuration issues before you try to connect it again.
Please reach out to us for help if you have any questions!