You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
announcement close button
Home > Security Sensors & Sirens > ZSE43 Tilt | Shock Sensor > ZSE43 Tilt | Shock XS Sensor Manual Wake-Up Process
ZSE43 Tilt | Shock XS Sensor Manual Wake-Up Process
print icon

Incomplete configuration during inclusion? Pending changes? You may need to wake your sensor manually!


Battery powered devices are normally sleeping, to conserve battery. If you've made a change to the advanced settings for the ZSE43, the change will take effect once the device wakes up to receive communication from the hub. The sensor’s wake-up interval is set to 12 hours by default to save battery life.


To manually wake the ZSE43 Tilt|Shock Sensor:


  • Click the Z-Wave button 4 times quickly to wake the sensor up manually.
  • The LED indicator will flash once to confirm the device is awake. During wake-up, the sensor turns the Z-Wave radio on for one minute to receive communication from the hub. Long wake-up interval will not affect how often the sensor reports to your hub so we recommend leaving the default setting to conserve battery.


Please don't hesitate to reach out to us with any questions!

0 out of 0 found this helpful

Have you tried our virtual assistant chatbot? This AI tool can help you find answers from thousands of articles in our Knowledge Base quickly. Find it in the bottom righthand corner of the page.

Need more help? Our friendly team is ready to help you with any questions or concerns you may have about Zooz devices. Click here to submit a support ticket.

Are your devices registered? Extended warranty and firmware access is available for registered Zooz customers. Click here to submit your registration form.

Find the latest Zooz devices and great Z-Wave deals at The Smartest House.
scroll to top icon