How to Add Your ZEN72 Dimmer to the Z-Box Hub

Integrate the ZEN72 dimmer with your Z-Box Hub quickly and easily. You'll get access to all of its functionality, including the central scene multi-tap options, right away.

We strongly suggest using the Web UI when adding new devices to your hub but we also included instructions for mobile app users - just keep scrolling down!

ADD THE ZEN72 DIMMER FROM THE WEB UI:

1. Open your Z-Box web interface in the Internet browser and select Settings (the gear icon) from the sidebar navigation menu.

2. The screen will display all of your existing devices.

3. Click on the + Add device blue button in the top right corner.

4. Select Z-Wave Device in the next screen.

5. Make sure you can physically access your ZEN72 dimmer and click Start on the screen.

6. While the hub is in inclusion mode, tap the top paddle on the ZEN72 dimmer 3 times as quickly as possible. The LED indicator will start blinking. It may take a few minutes for the device to add and configure so please wait patiently and don't exit the screen.

7. Once the device is found, you'll be able to rename it and assign it to its room. The ZEN72 dimmer will create one device for on/off/dimming operation and one remote control device for scene control (multi-tap) programming. Click Next and then Finish once you rename and organize all of the newly created devices.

ADD THE ZEN72 DIMMER FROM THE Z-BOX MOBILE APP:

1. Open the Z-Box Hub app on your mobile device.

2. Click More in the bottom navigation menu.

3. Click on + Add Devices.

4. Select the Z-Wave Protocol.

5. Make sure you can physically access your ZEN72 switch and click Start on the screen.

6. While the hub is in inclusion mode, tap the top paddle on the ZEN72 switch 3 times as quickly as possible. The LED indicator will start blinking. It may take a few minutes for the device to add and configure so please wait patiently and don't exit the screen.

TROUBLESHOOTING:

If your switch is not found on the Z-Box Hub, you may need to reset it first. We recommend performing the reset using your hub and the exclusion option (it works even if the device has never been added to your hub before):

1. Open your Z-Box web interface in the Internet browser and select Settings (the gear icon) from the sidebar navigation menu. A list of your existing devices will appear.

2. Click the red - Remove device button in the top right corner.

3. Select Z-Wave Device in the next screen.

4. Make sure you can physically access your ZEN72 dimmer and click Start on the screen.

5. Tap the bottom paddle on the switch 3 times as quickly as possible. The LED indicator will start blinking and the Z-Box Hub will display a "Device removed" message.

If the LED indicator on the switch isn't blinking, make sure that the device turns on the light from the paddles. If it works well physically from the paddles, try a factory reset and then follow the inclusion steps above.

Please contact us if you're still experiencing issues or have questions! We'll be happy to assist you.