ZEN72 Dimmer installed and working manually? Then it's time to add it to Home Assistant!
Here are the quick and easy steps to have your ZEN72 included in no time:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- Tap the UPPER paddle 3 times as quickly as possible (LED indicator will start flashing)
- Home Assistant will confirm that the dimmer was added, and it will be immediately visible in your device list.
After successfully adding the ZEN72 to your network, you can control it remotely via Z-Wave, create rules or scenes, or change and customize the advanced settings.
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN72 we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
No luck including the ZEN72 Dimmer to Home Assistant? Give exclusion a try! It acts as a soft reset and can help the dimmer be paired to the network.
Send us a message if you have any other questions!
