You can connect and use your ZEN51 Dry Contact Relay right from the box as it is officially integrated with Hubitat. If any of the advanced settings aren't displaying for you correctly, please use the custom driver instead.
You’ll want to make sure your hub is operating on the latest Hubitat platform version before using the tool. You can then follow these step-by-step instructions to adjust the advanced settings of your ZEN51:
-
Open Hubitat in your browser.
-
Click on Drivers Code in the side menu.
-
In the top right corner, click on "+New Driver" and paste the code from the following link to access the code for the driver, then copy ALL of the code from the page.
-
Click Save in the top right corner.
-
You'll see a Zooz ZEN51 Relay Advanced in your Drivers Code list now.
-
Assign the driver to the device by opening to the device view and selecting the Zooz ZEN51 Relay Advanced from the drop-down menu under Device Type > User.
-
IMPORTANT: Click the Configure button and refresh the page in your browser for all of the settings to display.
-
Adjust all of the settings as needed.
-
Click Update Device.
If you’re having trouble or have other questions about your ZEN51, please don't hesitate to reach out to us!