The ZEN53 will be recognized correctly on the Z-Box out of the box, no handlers or drivers needed! Once the device is installed correctly and powered with a proper 6-32 VDC power supply, adding the device to your Z-Box Hub is fast and simple. You can add the ZEN53 using the Z-Box web interface or the Z-Box Hub mobile app, and we've included instructions below for both!
Here is how to add the ZEN53 from the Z-Box web interface:
- From the sidebar navigation menu of the Z-Box web interface, go to Settings by clicking on the gear icon.
- You will be redirected to the Devices menu.
- Click on + Add device.
- Select the Z-Wave Device option.
- Be prepared to start inclusion on the ZEN53. Click Start.
- While the hub is in inclusion mode, click the Z-Wave button on the ZEN53 3 times as quickly as possible (the LED indicator will start flashing)
- Enter the 5-digit DSK code (on the back of the ZEN53) when prompted
- Once the device is detected successfully, you will see the list of all child devices that have been detected. Click Next.
- Rename your device and assign it to a room. Click Next.
- Click Finish once done editing all devices.
How to add the ZEN53 from the Z-Box Hub mobile app
- Open the Z-Box Hub app on your mobile device.
- Click More in the bottom navigation menu.
- Click on + Add Devices.
- Click on Z-Wave Protocol and follow the same inclusion steps as described for the WEB UI above.
Having issues including your ZEN53 to the Z-Box? Please follow the steps here to try excluding the device first.
Still unable to include your device? Please let us know, and we'll be happy to help!