There are so many settings to customize the ZEN71 to your smart home needs!
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN71 Switch we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
All of the ZEN71's settings should be visible once the switch is included. If a certain parameter setting isn't displaying for you, you can use an alternative method to make adjustments to your On/Off Switch's settings.
You can now change any parameter manually on the JS Z-Wave integration for Home Assistant.
It needs to be done in zwavejs2mqtt and it’s not possible to do this within HA directly at the moment:
- Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
- You can enter the data according to the product documentation and click SET for the parameter to be updated.
- If you have a battery-powered device, you'll need to wake it up by performing the same activation sequence as during inclusion.
The ZEN71 Switch supports OTA updates, so if you're on an older firmware version and would like access to the latest advanced setting options we recommend updating your switch.
Reach out to us if you have any questions! We'll be happy to help.
