## The RGBW Dimmer comes with 5 light effect modes to set a mood or just have some fun with your lights: fireplace, storm, rainbow, polar lights, and police (strobing red, white, and blue). Here's how to trigger any of these animation using the Hubitat Rule Machine. 1. Create a virtual switch device: Under **Devices …
## The ZSE19 MultiSiren uses a brand new command class called _sound switch_ to manage custom tone playback in rules and automations. Unfortunately, there are currently no hubs that use the latest Z-Wave command library that would offer full support for it. This means we had to figure out a workaround for us all to b…
### Schedule and manage your sprinkler system from SmartThings with the ZEN16 MultiRelay: use it to automate up to 3 zones! The below instructions describe a Z-Wave-only control system. Do NOT connect your existing timer to the Sw inputs on the MultiRelay. Here is how you can use your MultiRelay as a multi-zone sprin…
### Add Z-Wave to your garage door with the MultiRelay by following the instructions in this article. Please check your local safety regulations first and make sure you test the device carefully after programming it to prevent accidental operation. The ZEN16 MultiRelay is NOT a reliable solution to track the open/clos…
### Schedule and manage your sprinkler system from Hubitat using the ZEN16 MultiRelay: use it to automate up to 3 zones! The below instructions describe a Z-Wave-only control system. Do NOT connect your existing timer to the Sw inputs on the MultiRelay. Here is how you can use your MultiRelay as a multi-zone sprinkle…
### Add Z-Wave to your garage door with the MultiRelay by following the instructions in this article. Please check your local safety regulations first and make sure you test the device carefully after programming it to prevent accidental operation. The ZEN16 MultiRelay is NOT a reliable solution to track the open/clos…