You'll have full on/off control of your switch using your Wink app; you'll also be able to add it to custom Robots.
However, Wink's interface doesn't give you access to the switch's advanced settings and parameter inputs (though this switch does give you the option to enable or disable your LED indicator even without access to advanced settings - here's how to do it). The lack of customization doesn't just apply to your ZEN26 switch - the same goes for all Wink-compatible devices that offer advanced options. Regardless, you'll still be able to take advantage of the switch's most important functionality: quick and reliable remote on/off control.
Here's how to add the device to Wink:
- Click on Hubs
- Click on Settings (the three dots in the upper right corner)
- Click on your hub (most likely named Wink Hub)
- Scroll down to Settings and click on Z-Wave Controls
- Click on Inclusion Mode
- Tap the UPPER paddle of the switch 3 times very quickly
- Rename your switch and start automating!
If you've tried the above and are running into issues, here's what to try next.
If you have any questions about the process above or want to know more about Wink's functionality, don't hesitate to reach out!
