Manual Control? Check. Now let's add your dimmer to Wink:

You'll be able to control it remotely out of the box and add it to custom Robots. However, you won't have access to the dimmer's advanced settings and parameter inputs - unfortunately, this a limitation in Wink's interface. The same applies for to other Z-Wave devices with advanced settings. In any case, you'll still be able to enjoy the dimmer's most important feature: quick and reliable remote dimming control.

Here's how to add your dimmer to Wink:

1. Click on Hubs 
2. Click on Settings (the three dots in the upper right corner)
3. Click on your hub (most likely named Wink Hub)
4. Scroll down to Settings and click on Z-Wave Controls
5. Click on Inclusion Mode
6. Tap the UPPER paddle of the dimmer 3 times very quickly
7. Rename your dimmer and start automating!

If you've tried including the dimmer Wink with no luck, here's what to try first. 

If you have any questions about the process above or want to know more about Wink's functionality, don't hesitate to reach out!